DFI Lanparty - Support:
'via Blog this'
Tuesday, July 22, 2014
Sunday, July 20, 2014
Monday, July 14, 2014
Sunday, July 6, 2014
Make Easy Marijuana Oil W/Small Amounts Of Marijuana
Make Easy Marijuana Oil W/Small Amounts Of Marijuana: "This recipe for marijuana oil is super simple and really easy to make. It doesn’t take alot of marijuana to get it going either. This is a great way to get high stealthily, in public places, and without smelling like skunk for the next several hours. Your eyes will still be red and bloodshot and you’ll probably be laughing your ass off, but other than that noone will be able to tell.
Ingredients For Marijuana Oil:
Aluminum Foil
Marijuana (anywhere from .3g to 2g, and it doesn’t have to be very potent, mids are good)
Olive oil/Canola oil/Vegetable oil/Peanut oil (any kind of oil that you can digest)
Toaster oven, or regular oven
Marijuana Oil Cooking Directions:
Preheat your oven to 160-200 degrees F.
Then cut a piece of foil off, depending on how much marijuana you have you’ll want a bigger piece, for anything less than a gram you should only need a 2in x 2in piece.
Fold the piece of aluminum foil into a bowl shape.
Put your marijuana in the middle of the aluminum foil bowl.
Pour your oil into the foil bowl. Try to make sure it’s about as much oil as marijuana you’ve got in the bowl. The marijuana should be covered in oil and you should have a little bit of oil left over in the bowl.
Fold up your aluminum foil bowl so no oil or marijuana spills out.
Put your marijuana foil ball in the oven for about 5 to 10 minutes.
Now you’ve got a foil ball with marijuana oil in it. Put it on some bread, use it as a dip, or just eat it like that. Lick the foil once you’re done and you’ll be flying high soon enough. Due to digestion and variances in body weight, what you’ve eaten before you’ve had the oil it could be anywhere from 20 minutes to 2 hours for the high to kick in. Don’t forget to use your eye drops. If you use more potent marijuana, then the higher you will get."
'via Blog this'
Ingredients For Marijuana Oil:
Aluminum Foil
Marijuana (anywhere from .3g to 2g, and it doesn’t have to be very potent, mids are good)
Olive oil/Canola oil/Vegetable oil/Peanut oil (any kind of oil that you can digest)
Toaster oven, or regular oven
Marijuana Oil Cooking Directions:
Preheat your oven to 160-200 degrees F.
Then cut a piece of foil off, depending on how much marijuana you have you’ll want a bigger piece, for anything less than a gram you should only need a 2in x 2in piece.
Fold the piece of aluminum foil into a bowl shape.
Put your marijuana in the middle of the aluminum foil bowl.
Pour your oil into the foil bowl. Try to make sure it’s about as much oil as marijuana you’ve got in the bowl. The marijuana should be covered in oil and you should have a little bit of oil left over in the bowl.
Fold up your aluminum foil bowl so no oil or marijuana spills out.
Put your marijuana foil ball in the oven for about 5 to 10 minutes.
Now you’ve got a foil ball with marijuana oil in it. Put it on some bread, use it as a dip, or just eat it like that. Lick the foil once you’re done and you’ll be flying high soon enough. Due to digestion and variances in body weight, what you’ve eaten before you’ve had the oil it could be anywhere from 20 minutes to 2 hours for the high to kick in. Don’t forget to use your eye drops. If you use more potent marijuana, then the higher you will get."
'via Blog this'
Thursday, July 3, 2014
Wednesday, July 2, 2014
Sunday, June 29, 2014
आयुष दर्पण: A Recipe To Make Cannabis Oil For A Chemotherapy Alternative
आयुष दर्पण: A Recipe To Make Cannabis Oil For A Chemotherapy Alternative: "Here is Rick Simpson’s Hash Oil Recipe:(HERE is his website)
To make Rick Simpson’s hash oil, start with one ounce of dried herb. One ounce will typically produce 3-4 grams of oil, although the amount of oil produced per ounce will vary strain to strain. A pound of dried material will yield about two ounces of high quality oil.
IMPORTANT: These instructions are directly summarized from Rick Simpson’s website. Be VERY careful when boiling solvent off [solvent-free option], the flames are extremely flammable. AVOID smoking, sparks, stove-tops and red hot heating elements. Set up a fan to blow fumes away from the pot, and set up in a well-ventilated area for whole process.
1. Place the completely dry material in a plastic bucket.
2. Dampen the material with the solvent you are using. Many solvents can be used [solvent-free option]. You can use pure naphtha, ether, butane, 99% isopropyl alcohol, or even water. Two gallons of solvent is required to extract the THC from one pound, and 500 ml is enough for an ounce.
3. Crush the plant material using a stick of clean, untreated wood or any other similar device. Although the material will be damp, it will still be relatively easy to crush up because it is so dry.
4. Continue to crush the material with the stick, while adding solvent until the plant material is completely covered and soaked. Remain stirring the mixture for about three minutes. As you do this, the THC is dissolved off the material into the solvent.
5. Pour the solvent oil mixture off the plant material into another bucket. At this point you have stripped the material of about 80% of its THC.
6. Second wash: again add solvent to the mixture and work for another three minutes to extract the remaining THC.
7. Pour this solvent oil mix into the bucket containing the first mix that was previously poured out.
8. Discard the twice washed plant material.
9. Pour the solvent oil mixture through a coffee filter into a clean container.
10. Boil the solvent off: a rice cooker will boil the solvent off nicely, and will hold over a half gallon of solvent mixture. CAUTION: avoid stove-tops, red hot elements, sparks, cigarettes and open flames as the fumes are extremely flammable.
11. Add solvent to rice cooker until it is about ¾ full and turn on HIGH heat. Make sure you are in a well-ventilated area and set up a fan to carry the solvent fumes away. Continue to add mixture to cooker as solvent evaporates until you have added it all to the cooker.
12. As the level in the rice cooker decreases for the last time, add a few drops of water (about 10 drops of water for a pound of dry material). This will help to release the solvent residue, and protect the oil from too much heat.
13. When there is about one inch of solvent-water mixture in the rice cooker, put on your oven mitts and pick the unit up and swirl the contents until the solvent has finished boiling off.
14. When the solvent has been boiled off, turn the cooker to LOW heat. At no point should the oil ever reach over 290˚ F or 140˚ C.
15. Keep your oven mitts on and remove the pot containing the oil from the rice cooker. Gently pour the oil into a stainless steel container
16. Place the stainless steel container in a dehydrator, or put it on a gentle heating device such as a coffee warmer. It may take a few hours but the water and volatile terpenes will be evaporated from the oil. When there is no longer any surface activity on the oil, it is ready for use.
17. Suck the oil up in a plastic syringe, or in any other container you see fit. A syringe will make the oil easy to dispense. When the oil cools completely it will have the consistency of thick grease.
For even further information, check out Rick’s written recipe here.For dosage information, please click here. But remember, consult a physician and do your research before you do anything to make sure you understand how everything functions.
Source:CE"
'via Blog this'
To make Rick Simpson’s hash oil, start with one ounce of dried herb. One ounce will typically produce 3-4 grams of oil, although the amount of oil produced per ounce will vary strain to strain. A pound of dried material will yield about two ounces of high quality oil.
IMPORTANT: These instructions are directly summarized from Rick Simpson’s website. Be VERY careful when boiling solvent off [solvent-free option], the flames are extremely flammable. AVOID smoking, sparks, stove-tops and red hot heating elements. Set up a fan to blow fumes away from the pot, and set up in a well-ventilated area for whole process.
1. Place the completely dry material in a plastic bucket.
2. Dampen the material with the solvent you are using. Many solvents can be used [solvent-free option]. You can use pure naphtha, ether, butane, 99% isopropyl alcohol, or even water. Two gallons of solvent is required to extract the THC from one pound, and 500 ml is enough for an ounce.
3. Crush the plant material using a stick of clean, untreated wood or any other similar device. Although the material will be damp, it will still be relatively easy to crush up because it is so dry.
4. Continue to crush the material with the stick, while adding solvent until the plant material is completely covered and soaked. Remain stirring the mixture for about three minutes. As you do this, the THC is dissolved off the material into the solvent.
5. Pour the solvent oil mixture off the plant material into another bucket. At this point you have stripped the material of about 80% of its THC.
6. Second wash: again add solvent to the mixture and work for another three minutes to extract the remaining THC.
7. Pour this solvent oil mix into the bucket containing the first mix that was previously poured out.
8. Discard the twice washed plant material.
9. Pour the solvent oil mixture through a coffee filter into a clean container.
10. Boil the solvent off: a rice cooker will boil the solvent off nicely, and will hold over a half gallon of solvent mixture. CAUTION: avoid stove-tops, red hot elements, sparks, cigarettes and open flames as the fumes are extremely flammable.
11. Add solvent to rice cooker until it is about ¾ full and turn on HIGH heat. Make sure you are in a well-ventilated area and set up a fan to carry the solvent fumes away. Continue to add mixture to cooker as solvent evaporates until you have added it all to the cooker.
12. As the level in the rice cooker decreases for the last time, add a few drops of water (about 10 drops of water for a pound of dry material). This will help to release the solvent residue, and protect the oil from too much heat.
13. When there is about one inch of solvent-water mixture in the rice cooker, put on your oven mitts and pick the unit up and swirl the contents until the solvent has finished boiling off.
14. When the solvent has been boiled off, turn the cooker to LOW heat. At no point should the oil ever reach over 290˚ F or 140˚ C.
15. Keep your oven mitts on and remove the pot containing the oil from the rice cooker. Gently pour the oil into a stainless steel container
16. Place the stainless steel container in a dehydrator, or put it on a gentle heating device such as a coffee warmer. It may take a few hours but the water and volatile terpenes will be evaporated from the oil. When there is no longer any surface activity on the oil, it is ready for use.
17. Suck the oil up in a plastic syringe, or in any other container you see fit. A syringe will make the oil easy to dispense. When the oil cools completely it will have the consistency of thick grease.
For even further information, check out Rick’s written recipe here.For dosage information, please click here. But remember, consult a physician and do your research before you do anything to make sure you understand how everything functions.
Source:CE"
'via Blog this'
Speedy Gonzales - Wikipedia, the free encyclopedia
Speedy Gonzales - Wikipedia, the free encyclopedia: "¡Ándale! ¡Ándale! ¡Arriba! ¡Arriba! ¡Epa! ¡Epa! ¡Epa! Yeehaw!"
'via Blog this'
'via Blog this'
Saturday, June 28, 2014
Friday, June 27, 2014
Wednesday, June 25, 2014
Tuesday, June 24, 2014
Subscribe to:
Posts (Atom)